Innovate SB Live 4.1 sound card CT4830 sound card driver debugging all kinds of configuration

The trade rumors, after an independent sound card will gradually disappear after a few years development, now has the integrated sound card can achieve 7.1-channel level. And for ordinary users, that is almost 7.1 “less than absolute” meaning, there are few and far between even 7.1 speakers. Sound card but a lot of independent senior user to see when this will be very much disdain, in the independent world of sound card, sound card integrated with the analogy should not feel special, as mentioned in Example for innovative SB Live 4.1 sound card driver to install a modified version of various types, the effect brought about by shock.

Innovative 4.1 sound card CT4830, starting 30, belong to this SB Live series, the chip is 10k01, non-Dell OEM, third-party drivers can be loaded, soft change of 5.1, third-party driver is very powerful, can only be described as shocking.

First, install WinXP own drive: plug in sound card, WinXP will be able to identify themselves, and the sound a bit harsh, there is a microphone recording Bleep noise. There is no specific control interface, can not adjust front, rear volume. Such an effect, people can only suspect that goods are cottage. Fortunately, there was a line before and know are problem-driven, there is no return to the seller.

Second, install the official driver of innovation: a download version in 2007, but is not installed on. Innovation-driven and has a full set of more than 300 M, too, to give up.

Three, You drift-driven: a modified version of the domestic, I installed a few versions to compare from the best version of 36303. Download Address: http://drivers.mydrivers.com/drivers/175-70272-Creative-Sound-Blaster-Live-YouP-PAX-Live-3.63.03-For-Win2000-XP-2003/
WinXP comes with driver and compared with a qualitative leap in sound quality. Microphone effect is very good, no noise, and can mix their own settings. Online, the best songs are recorded in the civilian level sound card. Each channel can adjust the volume, bass treble, EQ adjustment and so on. Have a very interesting, the volume of human interface. Around the horn, there is a middle dot, dot drag the mouse, where sources said, will automatically adjust the sound of four speakers. The only regret is that only a little at a time when 5.1-channel selection in order to set the bass frequencies. (Russian kx-driven, at 2.1,4.1 and 5.1 can be set up under the low-frequency)

Four, the Russian KX driver, the godfather of class-driven, powerful people get crazy: Russia kx driven by the pursuit of countless people, and even worship. But to drive this drive is to spend some energy. Just start the installation on three issues encountered.

1) Pre-silent, and only speak after the purchase. Fortunately, I have four speakers connected to the, then, if only the front two, really good that the driver is not loaded.
Solution: kx-driven developers, innovative sound card was found pre-and post the output of the chip are not the same, and that rear sound good in front, there are pre-default swap rear. Solution, a volume in the main interface which will remove the hook before and after the home exchange; or front speaker is to the rear access hole, then after the home front speaker hole, this approach is used. Comparing the pre-, post-voice, huh, huh, did not distinguish between them. May be necessary for a better speaker.

2) can not find the option to set the channel, interface confusion. The main sub-volume, input and output, sound recording, AC97 and so on, are one of the most AC97 halo.
Solution: Set the volume in the main channel is the interface between and there is a speaker icon next to a question there is, at first glance, that is to help, in fact, you can click on it to enter the settings after the sound that its option to more than drift version.

3) the microphone sound. The problem is solved after the online search.

Step 1. AC97 page; the drop-down box – the microphone – the microphone to remove the mute, and push to 0 

Step 2. Audio interface: AC97 remove input mute, and push to the 0 – wave sound recording to a minimum level Department 

Step 3. Online at input and output interfaces, said: remove the AC97 input mute, and push to the maximum. 

Test, a slight noise out of speakers. AC97 election is still mute. After testing, it should be able to use a microphone. In addition, one is beginning 3545b driver installed, no matter how stressed, not the voice of the microphone. Later, download the sophisticated version of the 3538m, normal. Version of the introduction are 3538l, 3538m actual download version is down.
Download address is: http://drivers.mydrivers.com/drivers/171-68535-Creative-Sound-Blaster-Live-Live-5.1-Audigy-Audigy-2-kX-5.10.0.3538L/

At this point, kx drivers to solve the basic problem. The effect of return are staggering. Sound quality and open up drive as good as bleach. Latin America and the voice of a more open, more separation. Dive deeper bass. 8 have been too deep bass, so that’s my multi-media subwoofer speaker a bit can not stand in the place of music when a larger base, it is not enough quick convergence, there is a little mixed. But look if it is large, the absolute fit!

For example, as drivers travel drift TP-Link, D-Link router, such as, Web interface is simple to configure. Kx is then driven Cisco routers, unfriendly interface, but as long as the master configuration command, the absolute tough. The following is the configuration of its interface 

Flexibility to set up inside sources, a variety of effects, the output speakers, go a different routing method and so on, but these are the use of sound card hardware resources. Bahrain after kx driver, WinXP which can be seen at 4 kx wave CT4382 10k1 sound card. In other words can be the same as MPLS VPN set up so that different software use different virtual sound card, output different results. Following this picture of people online are designed to go a different procedure is an example of a different route. 

Kx drivers but also, there is a lot of plug-in, I believe as long as careful adjustment of the speaker can exert the greatest effect, can be adjusted to meet their perfect sound quality. The following is a video teaching, perhaps less than 1 hour. Configuration are super-advanced techniques, there is interest to study under.